Many men are dissatisfied with the parameters of their sexual organ and do not want to put up with it.Therefore, different methods are used to make the penis more childish and long.A device as a pump to enlarge member is also widely used.
The principle of operation of the device
POMP is a cylindrical device.The device is designed to enlarge the penis of a person of length and width, as well as to increase the erection.
The pump works according to a simple basis.When used around the male penis, a pressure occurs, which helps to increase blood flow, filling the cavernous bodies with blood.The same happens as in an erection.The penis becomes very firm, swells, allowing you to increase its parameters.
Varieties of pumps and pumping
The penis enlargement pump, regardless of type, has a single structure structure.This is a transparent flask that depicts centimeters.There are also devices through which a vacuum is created and the necessary pressure is maintained.
There are three types of pumps:
- Guide.The vacuum is created using a piston or pear.Such devices have a lower price, so they are often used.However, men have to wait a long time to use them for their use.
- Automatically.With this type of pump, the pressure in the flask is created thanks to the electric pump already built into the device.Your work is required to insert batteries.Automatic devices are more preferred as they have high efficiency, allowing you to control pressure and absorption.
- Water.The most new pump type.It differs in that water is used instead of air.Such a variety of increased, effective, has few contraindications and serves much longer than previous models.
Pumping is done in two ways.The first is called packaging.Its essence is to stretch the tunic and enlarge the penis lengthwise, but not in width.To do this, use a narrow flask in which the penis cannot swell on the sides, but will extend.
The second method is classic pumping.In this case, a wide flask is used, in which the penis is able to swell in all directions.This allows you to increase the width and length of the organ.
Safety precautions should be monitored during the exercises.
Selection criteria
The lover's selected pump is taken into account the size of the penis and the purpose of its use.Experts advise the following:
- The length of the device should be more than 3 cm.
- The width should be more than the diameter of the penis at 2 cm.
- For beginners, it is recommended that you choose a manual type of device as it is the fastest.
The above size of the member is only taken into account in a state of excitement.
In the process of buying it is worth paying attention to the materials that increase.The flask should be strong enough to avoid accidental damage to the male organ.
Contraindications
It is not allowed to use a vacuum increase in men suffering from the following pathologies:
- Thrombosis.
- Fibrosis.
- Liver diseases.
- Kidney disease.
- Diabetes.
- Pathologies of the heart and blood vessels.
- Sexually transmitted diseases.
- Dignity in the work of the university.
If a person is not sure that he or she can use a pump to increase the length and width of the penis, then it is worth seeing the doctor for a checkup.
Pluses and disadvantages
The vacuum pump allows men not only to make their dignity longer and wider.The device also helps to improve erectile function, prolonging sexual contact by reducing organ sensitivity.In addition, the device allows you to adjust the shape of the penis, even in the presence of curvature.
The negative sides of the pump are manifested only with its improper use.Failure to follow the instructions has very unpleasant consequences.
The effect of the use
If you use the pump constantly, after 6 months the penis will change its size forever.In order to maximize effect, it is recommended to take medicines that increase the production of sex hormones in men at the same time.But this can only be done after consulting a doctor.
It is worth knowing that a pump and penis enlargement pump are the same.
These, then tried the pump, keep in mind that they were able to achieve the desired result.Six months later, the length of the penis increases by 3 cm and the thickness is 2 cm.
Instructions for use
To use a vacuum pump to enlarge the penis, there is no need for special skills.Before the procedure, the device must be treated with lubrication to provide sliding.
The male member is obliged to lubricate with a special cream, the effect of which allows us to normalize blood flow, to enhance blood tide to the penis.
Then place the genitals in the cylinder.Eliminate the air from the flask to create a vacuum environment.Once redness occurs, you need to wait 30 seconds and start air.The procedure should last no more than 15-20 minutes.
Possibilities
No wonder a special instruction was created for the use of the pump.The implementation of all manipulations strictly on it avoids adverse effects.But sometimes men ignore the rules.
As a result, instead of the desired centimeters, they receive the following:
- The appearance of a swollen ring at the base of the penis head.This happens due to stagnation of the lymphatic fluid.This phenomenon can occur even with the proper use of a vacuum device.If this side effect is observed, you should stop using the device.
- Penis swelling due to the flow of a large amount of lymph.
- Deterioration of erectile function.
- Penis redness, the appearance of bleeding.
- Thrombosis.The disease is a huge threat to human life, but it is extremely rare when using the pump.
So there are no negative effects, it is important not only to use the pump properly.It is also necessary not to ignore the presence of contraindications for its application.If they are, then you should look for other methods to enlarge your penis.
Domestic
For men who do not want to spend money to buy a factory increase, it is possible to do it at home with your own hands.
From the cuff pump
In order to create an airless environment, it is necessary to promote the cuff pump, to rotate the cuff with the back.Then you need to reassemble the device, but already in the opposite order.
Then you have to make a valve that is designed to come out of excess air.For this purpose, you can apply the valve from the aquarium compressor.It must be connected to a suitable hose and compaction.
By the compressor
You can pick up the compressor of unnecessary refrigeration equipment.After extracting the evaporator and capacitor, the pipes they are connected must be cut.Then connect the compressor to the net.
Get an air filter at each motorist store.It must be attached to the opening of the compressor.The filter must be connected to the rubber hose of the required size.Then it is only left to try the effect of the device.
The pump helps, but the use of testosterone -containing drugs, or the use of an extender using a pump, has a greater effect using a pump.
Using a syringe
Take a plastic pipe, cut three parts, the size of each of them should be 10 cm.Attach them to the Trinity.The result is a triple of three bastards.
To the central withdrawal to attach the nose of the syringe.Install valves on the side bends.
It is important for a person to open and the second - inside.In order not to go wrong in the future, you need to draw arrows that will show the air direction.
Using plastic bottles
Quite a simple penis enlargement pump can be created by ordinary plastic bottles.It is only important to choose a different size of containers.The one who is greater must cut the top to make the cylinder shape.
Make holes at the bottom of the second bottle and place it in the first container.It is important not to form a large gap between the walls.Then you have to attach the hose to a large container.You can pick it up from the pump to pump the wheels of the bicycle.
Care of the device
In order to maximize the expansion of service life, you need to take care properly.If the device is purchased alone and not yet used, then it is necessary to rinse it thoroughly with soap and then dry and treat with any antiseptic.Then wash the device after each use.
You cannot treat the pump with hydrogen peroxide or boiling water, as well as use fat with fat during the procedure of the lubrication system.Otherwise, the risk of damage is high.